Carburetor(s) back on the bike (finally)

Carburetor's are back on the bike with the FactoryPro jet kit and new tubes. Next step is to get the rear shock installed and possibly finally start riding again.

The kit was installed with the following options:

• 137.5 main jet
• 42.5 pilot jet
• Ti Needles with the shim on the second position.
• 2.5 turns for both mixture screws.

I ended up getting a pair of SBK forks, but one of them is tweaked and will need to be straightened (hopefully by Mr. Blotter).

Bike is definitely cleaner than it was before the carb's were removed to be modified.

Clean

Not clean